Model selection and protocol selection
Notes
3
Depending on the package purchased, POCKET CC2500 single-chip multi-protocol module built in. To
view the latest list of all compatible protocols, please visit https://www.multi-module.org/ Please note that
new protocols will be constantly updated and added to the latest
firmware. Some new protocols may require firmware upgrades.
Long press the MDL button to enter the model settings, select MULTI in the SETUP page, and select the desired
protocol in the sub-options. The system will automatically turn on the corresponding RF
module according to the RF protocol you selected.
• Bind [BND] is used to start the binding process.
• Range [RNG] button can reduce the power to 1/30 to facilitate testing of remote-control distance.
• Need add something here about bind ELRS.
EdgeTX software is highly versatile, and has a large number of programming and mixing functions. Please
download the comprehensive software installation guide from the link below for more detailed instructions:
https://www.edgetx.org
Model selection and protocol selection (ELRS version)
POCKET ELRS units are equipped with an internal ELRS module, capable of providing 25mW-250mW RF
output. In non-extreme circumstances, 100mW output at 500Hz update rate is recommended, as higher RF
output and update rates may significantly reduce battery life and generate excessive heat.
Bind instructions
1
：
Turn off the transmitter.
2
：
Cycle power to the receiver 3 times, the receiver LED will flash twice- indicating bind mode.
3
：
Turn on the transmitter, long press the SYS button and choose the ExpressLRS LUA under the
TOOLS menu. Scroll down to [Bind] and press enter.
4
：
The LED on the receiver should now be solid, indicating successful bind.
