RadioMaster BOXER, Быстрый старт

Страница: 3 / 10

Remote control overview
Batteries and charging
2
Boxer has a built-in USB-C charging function for 3.7V lithium batteries. The charging circuit is only designed
to charge 2x 3.7V Li-ion 18650 or 2x 3.7V Li-Poly batteries (2s 7.4v Lipo battery pack), the nominal battery
voltage is 3.7V, the charged voltage is 4.2V/Cell.
Do not use LiFE battery packs or 18650 lithium-ion batteries with a nominal voltage of 3.6v with a fully
charged voltage of 4.10V. Charging the incorrect type of battery may damage the charger or cause a fire.
If using Li-ion, ensure the cells are not protected and are button-top cells.
Please check the voltage and condition of the battery regularly and never charge unattended. Always charge
in a safe area away from combustible materials. Refrain from charging if the remote control gets wet or
damaged in any way. Do not charge with the polarity reversed
RadioMaster does not assume any responsibility for any adverse consequences caused by the use or misuse
of this product.
Antenna
Type-C Data Port
6 Pos Buttons
Trainer Port
LCD Screen
Headphone Jack
SF Momentary switch
S1 Dial S2 Dial
SE Latching switch
SB 3 Position
SA 2 Position SD 2 Position
SC 3 Position
Speaker
Right Gimbal
Left Gimbal
Power Button
Lanyard Loop
MDL Button
SYS Button
RTN Button
PAGE> Button
PAGE< Button
TELE Button
Scroll wheel
TYPE-C Charger Port
Trim Buttons