RadioLinx RLX-FHE, Быстрый старт

Страница: 11 / 14

8
Test Communications
With each radio configured, ensure that you still have your PC connected to the Master RLX-
FHE as shown in the following diagram.
Note: This test requires the use of the ping command. You will need to know the pathname
where the ping command resides in order to use it. If you do not know that path, contact
your system administrator.
1. Open a DOS window on your PC
2. Change to the directory where the ping command resides. At the prompt, type:
ping xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IP Address is the address you noted on the first remote
radio.
3. Press Enter
A “Reply from…” response indicates that communication was successful.
A “Request Timed Out…” response indicates that the test was unsuccessful. In this case,
repeat the configuration process.