RadioLink RTC8, Руководство пользователя

Страница: 8 / 11

7
2. Debug/Status information
3. Parameter configuration
Notice!
①
Each time the device is connected, the parameters will be automatically obtained once and sent
to the computer.
②
All parameters must be written after modification. Click "Optimset" in the lower right corner,
otherwise the parameters will not be set successfully.
(1) CAN Timing
①
Preset baud rate selection: After selection, BS1, BS2, BRP, and SJW parameters will be
automatically set. When the preset value does not meet the requirements, parameters of BS1,
BS2, BRP, and SJW can be manually adjusted according to the actual situation.
②
BS1(TSEG1): Bit segment 1
③
BS2(TSEG1): Bit segment 2
④
BRP: The duration of one time quantum
⑤
SJW: (Re)synchronization jump width (The larger the value is set, the larger the baud rate error
is allowed.)