RadioLink Electronic Limited
www.radiolink.com
5
A560 Disassembly Steps
：
After the flight, please disconnect the battery first, and then refer to the above assembly steps to disassemble the parts of A560 in turn. The disassembly steps
are as follows:
1. Disassemble the propeller.
2. Disassemble the landing gear. Please see Note
①
3. Disassemble the the drawbars and support rods. Please see Note
②
4. Diassemble the buttons to fix the wing. Remove the slotted fuselage vane and wing. Insert the slotted fuselage vane back.
5. Diassemble the button to fix the tail. Remove the two parts of the tail (horizontal stabilizer).
6.
Arrange all the spare parts and put them into the bag in turn. Keep all drawbars and support rods parallel to the fuselage when packing the fuselage in the bag.
Please see Note
③
Disassembly Notes
：
①
When disassembling the landing gear,
please push the two metal rods of the landing
gear in opposite directions at the same time,
and then push the metal rods to make it out of
the slot.
③
when packing the fuselage in the bag,
please keep all drawbars and support rods
parallel to the fuselage to avoid damage to the
drawbar/rod caused by improper placement.
②
When disassembling the drawbars or
support rods, please put the screwdriver in the
middle gap of the clasp, and then pry it.
