RADIOHAUS RH-DX640, Руководство по сборке и инструкция

Страница: 2 / 10

19
Radiohaus Radiocomunicação
Rua Candelária, 672 | Centro | 13330-180 Indaiatuba, SP Brazil
Fone: +55 19 3894-2677
www.radiohaus.com.br
www.radiohausamerica.com
Designed and produced in Brazil by:
Table 1
Example of how to fix the ends of the cables and adjust the frequencies in each band
29500 29180
28840 28500 28150 27790
26280 25970
25700 25410 25080 24776
22240 22075
21784 21600 21390 21190 20985
19046 18880
18710 18540 18370 18175 17990
14530 14410
14315 14210 14110 14010 13905
10390 10335
10290 10280 10230 10175 10115
7250 7215
7190 7160 7125 7100 7070
10m band (28000 ~ 29700 kHz)
12m band (24890 ~ 24990 kHz)
15m band (21000 ~ 21450 kHz)
17m band (18068 ~ 18168 kHz)
20m band (14000 ~ 14350 kHz)
30m band (10110 ~ 10150 kHz)
40m band (7000 ~ 7300 kHz)
(Braid the cable through the central plastic insulator as above. Do the same on both sides)
2) Return the remainder of the wire so that it is adjusted according to the frequency of
each band (above).
wire hanging (dropped).
NOTE: The frequencies above were measured in the prototype and may suffer
1) Pass the cable through hole 3 to the yellow mark and braid through the other holes
changes due to various factors. The frequencies indicated above are just a reference.
as shown in the first figure above.
3) For the 40 meter band, if you need to reach a lower frequency, leave the end of the
Yellow mark