![Radioddity GA-2S Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/radioddity/ga-2s/ga-2s_user-manual_780165008.webp)
3) The radio is fully charged once the radio’s green status LED goes steady. Please
remove the radio to avoid the overcharging.
Caution
Be sure the output DC is 5V/1A, when you choose micro USB for charging. Never
exceed 1.5A. It is also suggested to use the desktop charger while possible.
Antenna
Short thick antenna is suitable for short-distance communication, while long thin
antenna (optional) will offer you longer distances. The communication range will be
decreased in bad weather or among trees or buildings.
Please note that the jack of antenna is FEMALE, while the jack of the radio is MALE
(SMA-F/M connectors).
Installing and removing the antenna
1) Align the threaded end of antenna and the threaded hole at the top of radio,
rotate the antenna clockwise until it is tight
2) To remove the antenna, rotate it counter-clockwise until the antenna spirals out
Installing external headset
Gently displace (do not remove) the mic/speaker jack cover, insert the headset into
the mic/speaker jack
Quick Start Guide
1. Carefully open the box and remove radio body, battery and antenna.
2. Install battery in radio body until it clicks (be gentle!) (See specific directions in
previous section)
3. Install antenna into radio. (The antenna will smoothly screw into radio.) Do not
force or cross threading may occur. Make sure, after about 10 turns, the antenna
is fully seated and tight.
4. Turn on power knob by twisting gently counter clockwise. The radio will respond
with, “Open the radio, 1,”or whatever channel is selected by the taller selector.
5. Select your desired channel, radio will respond with “One, Two, etc.”
6. Press the PTT and talk!
Visit Radioddity.com For Downloads And Help
08
Visit Radioddity.com For Downloads And Help
09
Chapter 3.-Basic operation