RC1880DK
2017 Radiocrafts AS
RC1880DK User Manual (rev. 1.00)
Page 2 of 9
Radiocrafts
Embedded Wireless Solutions
Demonstration kit Introduction
The Demonstration Kit (DK) is designed to make it easy for the user to evaluate the onboard
module, develop an application and build prototypes very quickly. The kit includes two Demo
Boards (DB). The demo board contains the selected module with embedded protocol and
associated support circuits. The boards are delivered with a preprogrammed co-processor
firmware and can easily be operated using a PC terminal emulator. For using the
preprogrammed firmware, please see [1].
Your Demonstration Kit contains the following items:
Kit contents
Item
Number of articles
Demo board w/radio module
2
Antenna, 50
quarter-wave monopole, SMA male connector
2
USB cable
2
This User Manual describes how to use the Demonstration Kit and provides detailed
documentation for the Demonstration Board.
The Demonstration Kit includes what you need to evaluate the RF performance of the modules,
develop your own application interfacing the modules, and can also be used to build a prototype
of your application on the RC1880 module.
Demo Board Introduction
The Demo Board contains an USB connector, USB to serial converter, LEDs, voltage regulator,
power switch and programming/debug connector. All I/O signals are routed to holes at the edge
suitable for 2.54 mm pitch pin headers.
Figure 1: RC1880 Demonstration Board
Antenna
connector
Module article
number
JTAG
programming
connector
USB power LED
User LEDs
P1: USB micro
connector
RESET
Connector holes
P4/P5
Connector holes
P6/P7
Power switch
