Radio Zeeland DMP Falcon F-701, Руководство пользователя

Страница: 25 / 34

Version:
0.1
Date: 9 November 2010
Document: Falcon701 Ver01 Page 25 of 34
First release: 04 February 2010
2.4.1 Set-up webpage
In a new installation, each device (F-700 and F-701) should get his own, unique IP-address.
Just connect one device in time and connect with the webpage of the device. Set the IP-
address of the device en click on OK. After rebooting the device, it will have the new IP-
address.
If all devices does have a unique IP-address, the other settings can be done.
The following settings can be done:
- Device:
Device type
: for a substation is should be set to Falcon 701.
Control board connected : set to NO
IP-Address : IP-address of the device (should be in the range
192.168.2.x).
- Appearance
These settings are only for a F-700.
Colour
: background illumination colour.
Background Group : dimgroup.
Dimvalue : startup dim value (between 0 en 15).
Day/night : no function yet.
- Network:
Factory default the ‘Number of channels’ is set to 2. Set the number of channels in your
installation and click on OK. The webpage will now be refreshed. Now set-up each channel
very carefully. Also the channel of the set-up page should be set in the list. If one or more
channels are not set correct, the intercom system will malfunction.
- Sounds:
Alarm sound
: set to 0
Key Push Volume : only for F-700.
Gain setting : output power speaker.
LineIn Volume : input power microphone (set-up between 0..65535).