FP104590-1 REV D.doc
Page
2
of
5
IMPORTANT!
Please read instructions through completely before beginning installation.
Caution should be used. Qualified persons experienced with antenna
assembly and installation are required for installation.
DISCLAIMER
Radio Waves Inc. disclaims any responsibility or liability for damage
or injury resulting from incorrect or unsafe installation practices.
Your FPD flat panel antenna shipped to you in one box containing the following components:
1. FPD flat panel antenna
2. Antenna mounting bracket
3. (2) U-bolts with nuts and washers
You will need the following tools to complete assembly of the antenna at the site:
1.
½
” open /box wrench or deep socket.
The antenna is capable of being mounted on up to a 2/5” O.D. pole.
1. Determine whether the antenna will be mounted on the left or right side of the pole.
Mounting bracket set up for Left
hand pole mount
Mounting bracket set up for Right
hand pole mount