PG
4
During reset you should see the “radio tower” icon appear on your CT along
with some beeps indicating that the CT Thermostat is initializing the RTZW-
02 USNAP module. When the beeping finishes (about 10 seconds), your CT
Thermostat will be ready to join and be controlled by a Z-Wave® network.
Join or Un-Join Network
1) Set your primary controller to INCLUDE mode to add the thermostat as a
node on your network (see your specific controller’s User Manual for detailed
instructions).
2) Press/Touch the Mate Button. This will bring you to the network joining
screen.
Mate button: On touch screen units the MATE button is on the MENU
screen. On other LCD thermostat’s see thermostat instructions for mate
button location.
3) If you only have 1 USNAP module inserted in the thermostat you will see
a r1 or r2 to indicate that the radio is in slot 1 or slot 2. If you have multiple
radios you can select which radio you want to join the network by selecting an
r1 or r2 from the top left hand corner of the screen. When you have selected a
radio, the large r1 or r2 will appear in the center of the screen.
