PG
6
PG
7
Mount the 101 to Wall
1. Hold the CT101 against the wall, with the wires coming over the top;
above terminal block. The CT101 will cover the hole in the wall.
2. Position CT101 for best appearance.
3. Attach the CT101 to the wall with the screws provided.
4. If you are mounting the CT101 to sheet rock or if you are using the old
mounting holes, use the plastic anchors provided.
5. Mark first and drill a 3/16-in.(4.8mm) hole for the insert at each screw
location, then mount the unit.
Wall
Wires
Wall
anchor
from
HEAT
/COOL
system
C
W
Y
RH G
Place wires like this
Screw to wal
l
CT101
