Radio Systems Millenium-A Analog Console, Инструкция по установке и эксплуатации

Страница: 7 / 88

Radio Systems Millenium-A Console Page 7
1.4 Wiring Access Layout
1.4.1 Connectors
Millenium Analog Consoles can be ordered with RJ-45 female connectors, pinned out to the St standard, or
with 5-pin removable barrier strip connectors (quick connector).
1.4.2 Inputs
All audio inputs and audio patch points wire to the Six Channel Audio Board(s) on the base of the console. One board is
utilized for every 6 channel positions. Audio inputs are stereo and balanced. The left and right channels of one input are
wired to a single connector. Interstage channel audio patch points are unbalanced. These loop-thru inputs and outputs
for each channel are accessible on a single 5 pin quick connector. On RJ-45 version consoles only, there is also a 3-pin
post-fader patch point.
Consult the Six Channel Audio Board Section of this manual for detailed information on input and patch point wiring and
level attenuation.
1.4.3 Outputs
All program outputs are balanced and appear on connectors on the Output Board.
Also mounted on this board are connectors for external monitor inputs, monitor sends, talk back, timer reset, cue audio,
and control sends.
Consult the Output Board Section of the manual for detailed information on output and control wiring and level calibra-
tions.
1.4.4 Control
The front panel mounted Six Channel Control Board houses one 15 pin D connector for each remote channel control.
Consult the Six Channel Control Board Section of this manual for detailed information on control remote functions and
programming options.
Consult the Interface Options and Accessories Section of this manual for detailed information on the optional interface
card applications, wiring and function.
1.4.5 Wiring Quick Connectors (5-Pin Connector Console Version)
Audio input and output connections to the console are made via 5-pin connectors. These connectors may be unplugged
from the circuit board to facilitate wiring or servicing.
St wiring harnesses are available from Radio Systems which bring all input and output connections to conve-
nient connection blocks outside the console. Consult the factory for literature.
1.4.6 Wiring RJ-45 Connectors (RJ-45 Connector Console Version)
Use standard TIA 568B RJ-45 STP patch cords or 22 AWG shielded wire for audio connections. The cable should be
stripped so that the insulation comes close to, but does not enter the connector.
St wiring harnesses are available from Radio Systems which bring all input and output connections to conve-
nient connection blocks outside the console. Consult the factory for literature.
1.5 Operation
The Millenium Consoles have been designed to offer the greatest combination of user flexibility and operating ease. Ob-
viously, the console should be installed and operated in accordance with station format, personnel habits and engineer-
ing principles.
The following sections suggest some operational possibilities which were considered in the console design.