3. Installing the Indoor Radio Fence Transmitter
The transmitter can be placed laying flat on a surface or hung on a wall.
If hanging the transmitter on a wall the signal becomes very directional
The signal is strongest directly in front of and directly behind the unit. It
is the weakest to the side of the unit.
Do not
• Hang unit on a metal wall
• Place transmitter on metal surfaces
• Place near large metal objects such as refrigerators, washers, etc.
• Place near audio speakers
Note: Metal objects can alter the magnetic field and change the transmit-
ting range. The effect on the range depends on the size and shape of the
objects. The metal objects can also change the beep and the shock ratio.
A slight reduction in the transmission range will also occur when the
transmitter is placed on concrete floor due to the steel mesh underneath.
Optimum range is achieved when the transmitter is placed on a non
conductive surface, i.e, wood floor or table. A range in excess of over 10
ft. can be achieved when using this surface.
Operating the transmitter
To turn the transmitter on, plug the adaptor into the wall and connect
the other end of the adaptor into the transmitter. Rotate the ON/OFF dial
clockwise until it clicks. The red LED light will glow when powered.
Adjusting the range
The range adjustment dial (also ON/OFF switch) determines the distance
from the boundary that the receiver will pick up the signal. The range
is adjustable from 2 feet to over 10 feet depending on the surface the
transmitter is on. Adjusting the dial to the right will increase the signal
range. With the dial range turned all the way to the right, hold the
receiver with the probes pointing straight up. At a distance of about
3 to 4 feet away from the transmitter you should hear the correction
sound. Start backing away from the transmitter. The correction sound
will change to a warning sound (rapid beeping) finally there will be
no sound at all. This determines your maximum effective range in this
surrounding. If the range is too far, turn the adjustment dial to the left.
Repeat this process until you achieve your desired range.
Note: To avoid receiving a static shock, do not to touch the probes
during this step.
3
Содержание Indoor Radio Fence
Страница 1: ...Indoor Radio Fence Owner s Manual ...