Radio Systems, Inc.
CT-2002 Manual
Page
Slaved Displays
To Utilize as a Slaved Clock Display (CT-2002 Display units only):
1... Consult.page.10.for.setup.functions.to.select.either.RS.or.SMPTE.sync.format.
2.. Provide.serial.data.to.the.unit...Choices.of.serial.data.are.SMPTE.time.code.
and.Radio.Systems.Time-of-Day.data.from.CT-2002.GPS.or.CT-2002.Master.
units..In.addition.a.CT-2002.display.unit.can.be.used.to.provide.Time-of-Day.
and.Timer.data.in.the.Radio.Systems.format..To.connect.to.slave.Time-of-
Day.displays.only,.wire.only.the.serial.data.input.terminals.in.parallel.(use.
either.the.terminal.strip.or.RJ-45.connectors —see.the.connections.diagram.
on.page.22)..
3.. The.“SYNC”.front.panel.LED.will.light.and.the.time-of-day.will.immediately.
synchronize.to.the.master.unit.readout..
4.. Time-of-Day.setting.is.now.no.longer.available.on.this.slave.display..Time-of-
Day.setting.must.be.made.to.the.unit.providing.the.serial.Time-of-Day.data.
5.. If.the.data.link.is.lost,.the.clock.will.revert.to.stand-alone.local.operation.and.
the.sync.LED.will.extinguish..
6.. Local.timer.functions.continue.to.be.available.as.described.on.the.preceding..
page..
7.. The.minutes.and.seconds.may.be.offset.from.the.top.of.hour.input.closure..
See.manual.section.“Time-of-Day.Offset.on.page.8
.
and
.
“IR.Remote.control”.
section.
8.. The.hour,.minutes.and.seconds.may.be.offset.from.the.upstream.time-of-day.
serial.data.via.the.infra-red.remote.control..See.manual.section.“Time-of-Day.
Offset.on.page.8
.
and
.
“IR.Remote.control”.section.
Note:.software/hardware.kit.is.available.(Radio.Systems.part.#.CT-SYNC).to.
update.Windows.PC.clocks.from.your.CT-2002.serial.data.stream