Radio Shack XMODS, Руководство пользователя

Страница: 10 / 16

10 10 10
Driving Your Car and Adjusting Trim
After you turn on both controller and car, squeeze the trigger to move forward and push the trigger away
from the handle to go in reverse.
If your car does not drive straight when you release the steering wheel, adjust the trim:
1. Determine if the car steers too far to the right or left.
2. Turn off the controller, and then push the controller trigger fully forward.
3. Turn on the controller; the LED indicator on the controller flashes.
4. Keep the trigger held forward and turn the wheel to the right or left to adjust the trim.
UÊ
If the car pulls to the right, turn the wheel to the left.
UÊ
If the car pulls to the left, turn the wheel to the right.
5. Release the trigger; the LED indicator stops flashing and lights steadily.
Note: To avoid unintentionally adjusting the steering trim, do not operate the trigger or steering wheel when
you turn on the controller.
Running your XMODS continuously for long periods can generate high heat levels. If the car overheats, its
overheat protection will stop the car. In this case, switch the controller and the vehicle off and allow to cool
for at least 10 minutes before resuming operation.
When You Finish Driving
To conserve battery life, turn off the controller and car after you finish driving.
UÊ
Handle your XMODS car and controller carefully and do not drop them. Keep away from dust and dirt. Wipe
your car and controller with a damp cloth occasionally to keep them looking new.
UÊ
Keep your XMODS car and controller dry; if they get wet, wipe them dry immediately.
UÊ
Use and store only in normal temperature environments.
6000939_UG_EN 062013.indd 10 6/21/2013 1:17:26 PM