Radio Shack TAD-759, Руководство пользователя

Страница: 12 / 24

12
USING PRIVACY
To talk to someone else in the room
without the person on the other end of
the phone line hearing you, hold down
PRIVACY
. Release it to resume your
telephone conversation.
USING TONE SERVICES
ON A PULSE LINE
If you have pulse service, you can still
use special services that require tone
signals, such as bank-by-phone, by fol-
lowing these steps.
1. Be sure
PULSE/TONE
is set to
PULSE
.
2. Dial the service’s main number.
3. When the service answers, set
PULSE/TONE
to
TONE
. Any addi-
tional numbers dialed are sent as
tone signals.
4. When you complete the call, set
PULSE/TONE
back to
PULSE
.
MEMORY DIALING
You can store emergency phone num-
bers or the phone numbers you call
most frequently in the three priority
memory locations for one-touch dialing.
You can store 10 more phone numbers
in the indirect memory locations, then
quickly call each number with a few key
presses.
Each memory location can store up to
15 tone digits or 16 pulse digits.
Storing Numbers in Memory
Note: You will hear a dial tone during
most steps of this procedure. The phone
does not actually dial the number as you
store it, but you might also hear a busy
tone or recorded operator’s voice after a
few seconds. This is normal.
1. Lift the handset.
2. Press
STORE
.
3. Enter the phone number you want to
store.
Notes: If you make a mistake, hold
down the switchhook for a few sec-
onds, then release it and start over
at Step 2.
4. Select the memory location for the
number.