20
ENTERING A PAUSE
In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect. To en-
ter a 2-second pause, press
REDIAL/
PAUSE
.
P
appears on the display. You
can add more pause entries for a longer
pause.
REVIEWING MEMORY
NUMBERS
To review your memory numbers, press
MEM
. The list of memory location num-
bers (
01
–
20
) appears with the name
stored with each number (or
<Memory
nn>
if you did not store a name).
To see the stored phone numbers, press
. An arrow to the right of the number
means it is longer than 14 digits. Press
again to see the rest of the number.
Repeatedly press
to return to the
name display.
To exit the memory number list, press
MEM
.
To see a stored name and phone num-
ber at the same time, press
SELECT
when the cursor is by a memory location
number. To exit this display without stor-
ing any changes, hold down
DELETE
un-
til the display clears.
DIALING A MEMORY
NUMBER
To dial a number stored in memory, lift
the handset and press
MEM
. The list of
memory location numbers appears.
Choose a memory location (
01
–
20
) by
pressing a number or by repeatedly
pressing
or
, then press
TALK
.
You can also dial a memory number af-
ter pressing
TALK
. Press
MEM
(the dis-
play does not change but the phone is in
memory recall mode) then enter a mem-
ory location number.
Chain-Dialing Service Numbers
For quick recall of numbers for special
services (such as bank by phone), store
each group of numbers in its own mem-
ory location.
Dial the service’s main number first.
Then, at the appropriate place in the
call, press
MEM
and enter the number
for the location where the additional in-
formation is stored.
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.
43-726.fm Page 20 Tuesday, June 15, 1999 8:36 AM
