10
5. Plug the other end of the supplied
phone cord into a phone jack. Line
up the keyhole slots on the
bracket with the studs on the wall
plate, then slide the TAD down
onto the wall plate until it is
secure.
6. Slide the handset holder up and
out of its retaining slot and rotate it
180
°
, then slide the holder back
into its slot.
CONNECTING THE
HANDSET
To connect the handset to the base of
the TAD, plug one end of the supplied
coiled cord into the phone jack on the
handset and plug the other end into
the phone jack on the left side of the
TAD. Place the handset in the cradle.
Note: Your local RadioShack store
sells a variety of longer coiled handset
cords, which are useful when you
mount the TAD on a wall.
43-724A.fm Page 10 Tuesday, May 16, 2000 4:51 PM
