15
Telephone Operation
To end a speakerphone call, press
SPEAKER
again.
SWITCHING BETWEEN THE
HANDSET AND
SPEAKERPHONE
To switch to the speakerphone while you are
using the handset, press
SPEAKER
on the
base. When you hear the conversation on
the speakerphone, press
TALK
on the hand-
set.
To switch to the handset while you are using
the speakerphone, simply lift the handset off
the base. If the handset is away from the
base, press
TALK
, then press
SPEAKER
.
USING BOTH THE HANDSET
AND SPEAKERPHONE
If someone else is using the speakerphone,
press
TALK
on the handset to join the con-
versation. If someone else is using the hand-
set, press
SPEAKER
on the base to join the
conversation.
During the call, one person can hang up and
let the call continue at the handset or base.
Or, both people can hang up to end the call.
Note: If you hear a high-pitched noise from
the base’s speaker, the handset and the
base are too close together.
USING TONE SERVICES ON
A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these special
tone services by following these steps.
1. Be sure
TONE-PULSE
is set to
PULSE
.
2. Dial the service’s main number.
When the service answers, press
TONE/
on the handset. Any additional num-
bers you dial are sent as tone signals.
3. When you hang up, the phone automati-
cally resets to pulse dialing.
PAGING
To page the person who has the handset or
to locate the handset when the phone is not
in use, hold down
PAGE
on the base for at
least 2 seconds. The handset beeps for 1
minute. To stop it from beeping sooner,
press
TALK
on the handset twice.
Notes:
• The phone goes off-hook (you hear the
dial tone) the first time you press
TALK
to stop the handset from beeping. If you
do not press
TALK
again, the phone
remains off-hook.
• If you press
PAGE
for less than 2 sec-
onds, the handset beeps for only 2 sec-
onds.
MEMORY DIALING
You can store up to 10 numbers in memory,
then dial a stored number by pressing
MEM
and a one-digit memory location number.
Also, with the press of one button (
M1
,
M2
, or
M3
), you can dial a number that is stored in
one of the first three memory locations.
Each number you store can be up to 16 dig-
its long.
Use the supplied memory directory stickers
to record your stored numbers. Peel the
backing from each sticker and attach them to
the phone.
43-3806.fm Page 15 Tuesday, August 8, 2000 11:29 AM
