10
8. Plug the AC adapter into a standard
AC outlet. The message counter
counts down from
18
to
00
and the
TAD-1029 beeps.
9. Fully extend the base’s antenna and
raise it to a vertical position.
Mounting the Base Directly on
the Wall
To mount the base directly on the wall,
you need two screws (not supplied) with
heads that fit into the keyhole slots on
the bottom of the base.
1. Drill two holes 3
15
/
16
inches (100 mm)
apart. Then thread a
screw into each hole,
letting the heads ex-
tend about
3
/
16
inch (5
mm) from the wall.
2. Remove the mounting bracket by
holding in both tabs and gently pull-
ing out the wide end of the bracket.
3. Plug one end of the supplied long
modular cord into the telephone jack
on the back of the base.
3
/
16
"
3
15
/
16
"
43-789.fm Page 10 Monday, August 16, 1999 8:32 AM
