OPERATION
1. Insert the microphone’s
1
/
8
-inch (3.5-
mm) plug into the jack on the control
box.
2. Insert the control box’s two
1
/
8
-inch
(3.5-mm) plugs into your amplifier or
recording equipment’s microphone
jacks.
Note: If your amplifier or equipment’s
microphone jack is a
1
/
4
-inch (6.35-
mm) type, you need a suitable adapt-
er plug (available at your local Ra-
dioShack store).
3. Place the two supplied windscreen
sponges over the microphones sepa-
rately, insert the two microphones
into the microphone holders, then at-
tach the clip to your clothing.
Note: To hold the control box in place
for easy access, slide the control box
belt clip onto your belt or over a fold
of fabric.
4. Turn on the microphone by sliding
ON/OFF
on the control box to
ON
.
5. Talk into the microphone and adjust
the amplifier or recording equip-
ment’s volume control to the desired
sound level.
Note: If the amplifier’s or equip-
ment’s volume is too loud, you might
hear a loud squeal. To avoid this
“feedback,” either reduce the amplifi-
er’s or equipment’s volume, or adjust
the angle of the speakers to point
away from the microphone.
6. Slide
ON/OFF
to
OFF
when you are
not using the microphone.
Microphones
Control Box
Control
Box
ON/OFF
2
33-3028.fm Page 2 Friday, March 17, 2000 9:34 AM
