35
Beyond the Basics
Otherwise, press
./CLR
if you do not want to
select it.
^
When you select the option, press
./CLR
to exit
the option mode. Otherwise, to continue normal
scanning, repeatedly press
FUNC
until
disappears then press
SCAN
.
using signal stalker
To turn on Signal Stalker, turn
SQUELCH
fully
clockwise, then press
FUNC
+
once except in
WX search, band select, or program mode.
appears. Every 2 seconds, the scanner searches
for frequencies in the range you specified in “setting
the signal stalker options” on Page 33.
Note:
To continue scanning normally while Signal
Stalker is working, simply press
SCAN
.
When the scanner finds a frequency, it sounds the
alert you specified in “setting the signal stalker
options” on Page 33, and
Found
flashes. Press any
key to confirm the displayed frequency. During
Signal Stalker operation, the delay time is 10
seconds. After 10 seconds have elapsed, or if you
press
SCAN
, the scanner resumes searching. If you
find a frequency you want to monitor continuously,
press
HOLD
to hold the frequency. While in hold
mode, you can select the band where you are
searching by pressing
or
while
appears.
F
F
