22
4. When the scanner finds an
active frequency, you can do
one of the following:
• To store the frequency into the
current monitor memory,
press
MON
.
• To continue the search, press
D or —.
• To hold the frequency, press
LIMIT
.
-h-
appears.
Press
LIMIT
again to cancel the
hold and resume the direct
search.
Notes:
• If you press D or — while a
frequency is held, the fre-
quency changes in the current
step increment.
• If you tune to a search skip
frequency, the display shows
LOCKOUT
(see “Search Skip
Memory”).
Search Skip Memory
You can skip specified frequencies
during a limit, direct, or weather
search (see “Listening to the Weath-
er Band” on Page 25). This lets you
avoid unwanted frequencies or ones
you have already stored in a channel.
You can program up to 20 frequen-
cies to skip into the scanner’s memo-
ry.
To skip a frequency, press
L/O/
SEARCH SKIP
when the scanner
stops on the frequency during a limit,
direct, or weather search.
To clear a single frequency from skip
memory so the scanner can stop on
it during a limit, direct, or weather
search, press
LIMIT
to hold the
search, press D or
— to select the
skipped frequency, then press
L/O/
SEARCH SKIP
until
LOCKOUT
disap-
pears.
To clear all the skip frequencies at
once, while in the search mode, hold
down
L/O/SEARCH
SKIP
until the
scanner beeps 2 times.
20-417.fm Page 22 Wednesday, August 4, 1999 11:33 AM
