background image

63-996

09A02

Printed in China

RadioShack Corporation
Fort Worth, Texas 76102

%*'%-+0)

"

6*'

"

5+)0#.

"

56#675

(

14

"

6*'

"

%

.1%-

(

14

"

6*'

"

6

*'4/15'0514

75+0)

"

6*'

"

#.#4/

"

To turn on the alarm, press 

ALARM

ê

 appears. The alarm sounds at 

the set time, and turns off automatically after two minutes. Unless you 
manually turn off the alarm, the snooze feature activates and 

ê

 

continues to flash. In about eight minutes, the alarm sounds again.

To silence the alarm, press 

ALARM

ê

 remains on the display and the 

alarm sounds again at the set alarm time the next day. Press 

ALARM

 

again so 

ê

 disappears from the display to turn it off. 

±

±

±

±

%#4'

Keep the clock dry; if it gets wet, wipe it dry immediately. Use and store 
the clock only in normal temperature environments. Handle the clock 
carefully; do not drop it. Keep the clock away from dust and dirt, and 
wipe it with a damp cloth occasionally to keep it looking new.

If your clock is not performing as it should, take it to your local 
RadioShack store for assistance. Modifying or tampering with the 
clock’s internal components can cause a malfunction and might 
invalidate its warranty and void your FCC authorization to operate it.

(%%

"

&'%.#4#6+10

"

1(

"

%10(14/+6;

This device complies with Part 15 of the 

FCC Rules. Operation is 

subject to the following two conditions: (1) this device may not cause 
harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation. 

6*'

"

(%%

"

9#065

"

;17

"

61

"

-019

This equipment has been tested and found to comply with the limits for 
a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These 

limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful 
interference to radio communications. 

However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver. 

• Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected. 

• Consult your local RadioShack store or an experienced radio/TV 

technician for help.

• If you cannot eliminate the interference, the FCC requires that you 

stop using your clock. 

Changes or modifications not expressly approved by RadioShack may 
cause interference and void the user’s authority to operate the 
equipment.

52'%+(+%#6+105

Clock:

Battery  ...................................................................................  2AA 1.5VBatteries

Dimension (HWD)  ......................................................  10.5 

×

 

8.03 

×

 1.42 inches 

(267 

×

 204 

×

 36mm)

Weight (without batteries)  ....................................  Approx. 22 ounces (624 gms)

Temperature Measuring Range:  ................................................... 23

°

F to 122

°

(–5

°

C to 50

°

C)

Temperature Resolution .................................................................  0.2

°

F (0.1

°

C)

Remote Thermo-Sensor:

Battery .............................................................................. 2 

×

 AA 1.5V Batteries

Remote Temperature  .......................................... –4

°

F to 140

°

F (–20

°

C to 60

°

C)

Temperature resolution  ..................................................................  0.2

°

F (0.1

°

C)

RF Transmission ...................................................................................  433 MHz

RF Transmission Range:  ..................................................  98.4 Feet (30 meters)

Weight (without battery)  .................................................... 3.1 ounces (100 gms)

Dimension (HWD)  ....................................................... 4.09 

×

 2.72 

×

 0.83 inches 

(104 

×

 69 

×

 21mm)

Specifications are typical; individual units might vary. Specifications are subject 
to change and improvement without notice.

5KIPCN

5VCVWU

ø

The clock has received a radio signal strong enough to set 
the date and time within the last 96 hours. 

±

±

±

±

÷

The clock has not received a radio signal strong enough to 
set the date and time within the last 96 hours. Reposition the 
clock or set the date and time manually.

k

The displayed time has been manually set.

No Indicator

Automatic time setting is turned off. Remove and replace the 
batteries, or use a pointed object (such as a straightened 
paper clip) to press RESET.

-

The clock is receiving a radio signal and the time/date will be 
set shortly.

ù

The clock is receiving a signal, but reception might not be 
strong enough to set the clock. Reposition or rotate the 
antenna bar before the antenna symbol stops blinking.

5KIPCN

5VCVWU

nýý

w

Clock is in search mode.

nýý

u

v

w

 

Temperature readings are displayed.

nýý

No signal.

Product:

Jumbo-Digit Atomic 
Wall Clock with 
Wireless In/Out 
Thermometer

Model:

63-996

Responsible Party:

RadioShack
100 Throckmorton
Fort Worth, TX 76102

Phone:

817-415-3200

±

"

016'

"

±

"

Checking the Signal Status

• While searching for a signal, 

ø

 blinks at upper left of 

display for about 2–10 minutes.

• If a radio signal is not received within 10 minutes after 

installing the batteries, set the time manually. 

• Good radio signal reception overrides the manual 

setting. 

• If you do not press a button for about two minutes, the 

clock returns to the current time display.

7C

7C

7C

7C

 appears for AM time and 

FC

FC

FC

FC

 appears for PM time.

Using the Alarm

ê

 and the set alarm time appear when you press 

ALARM.

Limited One-Year Warranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from RadioShack
company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IM-
PLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE
WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER
OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE
PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF
TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclu-
sions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will,
at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar de-
sign; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and
products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be
charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, im-
proper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service
Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service
adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102

12/99

Отзывы: