11
Using Vehicle Battery Power
You can operate the HTX-400 from your vehicle’s battery using a
DC adapter such as RadioShack Cat. No. 273-1815.
Cautions:
You must use a power source that supplies 9 volts
DC and delivers at least 800 mA. Its center tip
must be set to positive, and its plug must fit the
transceiver’s DC 9V jack. The recommended adapter meets
these specifications. Using an adapter that does not meet
these specifications could damage the transceiver or the
adapter.
• Always plug the adapter into the transceiver before you plug
it into the cigarette-lighter socket, and unplug the adapter
from the cigarette-lighter socket before you unplug it from
the transceiver.
1. Set the adapter’s voltage switch to 9V.
2. Insert the 3.8 mm outer diameter/1.1 mm inner diameter
plug (Cat. No. 273-1712, not supplied) into the adapter’s
cord, so it reads +TIP.
3. Insert the plug into the HTX-400’s DC 9V jack.
4. Plug the other end of the adapter into the cigarette-lighter
socket in the vehicle.
!!
19-1102.fm Page 11 Friday, March 19, 1999 4:08 PM
