Radio Shack Genex MK 2000, Руководство пользователя

Страница: 9 / 19

Operation
Dual Watch Mode
This feature allows you to monitor two channels at the same time.
While in dual watch mode, the unit will continuously monitor both the
primary and dual watch channel. Received signals will be heard for 5
seconds, then the unit will resume scanning the two channels.
Pressing the PTT button during a received transmission will set the
unit to transmit on the same channel. Pressing the PTT button when
no signal is received will set the unit to transmit on the primary chan-
nel.
To set the Dual Watch Mode,
1. Press the MODE button 3 times until the (
) icon is flashing.
2. Select the desired channel by pressing the Up(
§
) or Down(
'
) button.
3. Press the PTT button or the MODE button 5 times to exit from the
selecting mode.
4. Press the SCAN button momentarily to cancel the dual watch
mode.
Flashing
13
Operation
VOX Mode
This feature enables you to have hands-free conversation. Your
voice or nearby sound is detected and the radio transmits without
the need to press the PTT button.
To set the radio for VOX operation,
1. Press the MODE button 4 times, and the (
) icon will appear
and flashing on the LCD screen.
2. Press the Up(
§
) or Down(
'
) button to select VOX off and from 1
to 3 VOX level sensitivity. The higher the number, the higher the
sensitivity.
3. To exit from the VOX selection mode by pressing the MODE button 4
times, or simply pressing the PTT button.
4. Vox can be turned off by selecting “ ” as the setting.
Flashing
Note : The VOX icon will be displayed on the LCD screen after setting.
When you are in VOX operation, Roger Beep will be disabled.
14