![background image](http://html1.mh-extra.com/html/radio-shack/et-905/et-905_owners-manual_3487601009.webp)
9
SETTING THE PULSE/
TONE SWITCH
Set
PULSE/TONE
for the type of ser-
vice you have. If you are not sure
which type you have, do this test.
1. Set
PULSE/TONE
to
TONE
.
(illus)
2. Press
TALK
on the handset and
listen for a dial tone.
3. Press any number other than 0.
If the dial tone stops, you have
touch tone service. Leave
PULSE/TONE
set to
TONE
.
If the tone continues, you have
pulse service. Set
PULSE/TONE
to
PULSE
.
SETTING THE
RINGER’S SOUND
LEVEL
The
RINGER OFF/LOW/HIGH
switch
controls the base’s ringer volume.
(illus)
Set
RINGER
to
OFF
when you do not
want the ringer to sound. You can still
make calls, and you can answer a
call if you hear another phone on the
same line ring.
Set
RINGER
to
LOW
in a quiet room,
such as a bedroom.
Set
RINGER
to
HIGH
in a noisy room,
such as the kitchen.
Note: The handset will not ring if it is
on the base and the base’s ringer is
turned off. However, the handset will
ring if it is away from the base, even
if the base’s ringer is turned off.
43-1080.fm Page 9 Tuesday, August 17, 1999 1:51 PM