14
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank
by phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Set
TONE/PULSE
on the base to
PULSE
.
2. Dial the service’s main number.
3. When the service answers, press
*
on the keypad. Then dial the
additional numbers. The phone
sends these numbers as tone sig-
nals.
4. When you complete the call, place
the handset on the base or press
TALK
to disconnect the call. The
phone automatically resets to the
pulse mode.
Note: We recommend you not use
RE-
DIAL
to dial numbers that include a
tone (
*
) entry.
USING PAGE
The
PAGE
feature lets you send a page
from the base to the handset. With the
handset’s power on and its
TALK
light
off, the handset beeps three sets of
two beeps when someone presses
PAGE
on the base. The
TALK
light on
the handset and the CHARGE/TALK
indicator on the base flash.
Note: The handset will not beep during
a call or if its power is off.
MEMORY DIALING
You can store up to 10 numbers up to
16 digits long.
Notes:
• If
TONE/PULSE
is set to
PULSE
and you want to use tone dialing
for a memory number, you must
store the tone entry (
*
) in the next
memory location. Do not store
both pulse and tone entries in the
same memory location.
• To keep your accounts secure, we
recommend you do NOT store
your personal access code for
services such as bank-by-phone
in a memory location.
43-1039.fm Page 14 Tuesday, August 17, 1999 10:12 AM
