![background image](http://html1.mh-extra.com/html/radio-shack/et-536/et-536_owners-manual_3476593015.webp)
15
5. For each stored number, write the
person’s or company’s name next
to the appropriate location number
on the supplied MEMORY direc-
tory sticker. (Use a pencil in case
you want to change the number
later.) Attach the sticker to the
phone.
To erase a stored number, simply
store a new number in its place. Or,
skip Step 3, then press the memory lo-
cation number (
0
-
9
) you want to clear.
A tone sounds.
Entering a Pause
In some telephone systems, you must
dial an access code (
9
, for example)
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number. However, you should
also store a pause after the access
code to allow the outside line time to
connect.
To do so, press
PAUSE
. Each press
enters a 2-second pause. For a longer
pause, press
PAUSE
additional times.
Dialing a Memory Number
To dial a number stored in memory, lift
the handset from the cradle or press
TALK
.
When you hear a dial tone, press
MEMO
and enter the memory location
number for the number you want to
dial.
Chain-Dialing Service
Numbers
When calling special services (such as
alternate long distance or bank by
phone), dial the service’s main number
first. Then, at the appropriate place in
the call, press
MEMO
and the number
for the location where the additional in-
formation is stored.
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire de-
partment, ambulance) and you choose
to test the stored number, make the
test call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.
43-1036.fm Page 15 Tuesday, August 17, 1999 9:52 AM