15
2. Press
HOLD
to put the first call on
hold.
3. Press either
LINE
1
or
LINE 2
for the
line not in use, then place a call to
another party.
4. After the second party answers,
press
CONF
. This connects all three
parties.
Note: To talk on only one line with-
out disconnecting the other line,
press
HOLD
. Both lines’ red indica-
tors flash. Then, press the button for
the line you want to talk on. To
return to the three-way conversa-
tion, press
CONF
.
5. To end the conference call with both
lines, hang up the handset.
To disconnect one line and continue
talking on the other, press either
LINE 1
or
LINE 2
.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by following
these steps.
1. Set
T
/
P
(Tone/Pause) at the back of
the base to
P
.
2. Dial the service’s main number.
3. When the service answers, press
. Any additional numbers you dial
are sent as tone signals.
4. After you complete the call, hang
up. The phone automatically resets
to the pulse mode.
43-469.fm Page 15 Tuesday, January 19, 1999 9:48 AM