Switch to
TONE
or
PULSE
to match the type of ser-
vice you have. If you have pulse service, you can
switch to
TONE
during a call to use tone services.
Plug the handset cord
into the jacks on the
base and handset.
Switch
RINGER
to
ON
or
OFF
. You
can still make calls with the ringer off.
Press to dial the last number dialed
(up to 31 tone or 32 pulse digits).
Press to end a call.
Press to end a call (so you
can make another) without
hanging up the handset.
Press for special services.
Press
FLASH
to produce a
switchhook sig-
nal for special
services (for
example, call
waiting).
USING THE PHONE
This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to alert you to
important operating and servicing
instructions included in the papers with
the telephone.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Note: The USOC number of the jack to be installed is
RJ11C (RJ11W for a wall jack).
1998 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation
Handset Cord
(coiled)
MOUNTING THE PHONE
Desk Mounting
Wall Mounting
(With or Without Wall Plate)
(Screws not supplied)
1. Pull Up
2. Rotate
Wall Plate
Handset Cord
(coiled)
Handset Holder
(Wall Mounting)
