Radio Shack ET-1126 Скачать руководство пользователя страница 6

6

Features

IMPORTANT SAFETY 
INSTRUCTIONS

When using your telephone equipment, ba-
sic safety precautions should always be fol-
lowed to reduce the risk of fire, electric shock
and injury to persons, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions

marked on the product.

3. Never install telephone wiring during a

lightning storm.

4. Never install telephone jacks in wet

locations unless the jacks are specifi-
cally designed for wet locations.

5. Never touch uninsulated telephone

wires or terminals unless the telephone
line has been disconnected at the net-
work interface.

6. Use caution when installing or modifying

telephone lines.

7. Do not affix the AC power supply cord to

building surfaces with metal fittings (if
the product has an AC power cord).

8. Unplug this product from the wall outlet

before cleaning. Do not use liquid clean-
ers or aerosol cleaners. Use a damp
cloth for cleaning.

9. Do not use this product near water. For

example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool.

10. Do not place this product on an unstable

cart, stand, or table. The product may
fall, causing serious damage to the
product.

11. Slots and openings in the cabinet and

the back or bottom are provided for ven-
tilation. To protect the phone from over-

heating, the openings must not be
blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug, or other
similar surface. This product should
never be placed near or over a radiator
or heat register. This product should not
be placed in a built-in installation unless
proper ventilation is provided.

12. This product should be operated only

from the type of power source indicated
on the marking label. If you are not sure
of the type of power supply to your
home, consult your local power com-
pany.

13. Do not allow anything to rest on the

power cord. Do not locate this product
where the cord will be stepped on.

14. Do not overload wall outlets and exten-

sion cords. Doing so can result in a risk
of fire or electric shock.

15. Never push objects of any kind into this

product through cabinet slots as they
may touch dangerous voltage points or
short out parts that could result in a risk
of fire or electric shock. Never spill liquid
of any kind on the product.

16. To reduce the risk of electric shock, do

not disassemble this product. Take it to
a qualified serviceman when service or
repair work is required. Opening or
removing covers may expose you to
dangerous voltages or other risks. Incor-
rect reassembly can cause electric
shock when the product is subsequently
used.

17. Unplug this product from the wall outlet

and refer servicing to qualified service
technicians under these conditions:

• When the power cord plug is dam-

aged or frayed.

43-1126.fm  Page 6  Thursday, April 27, 2000  11:23 AM

Содержание ET-1126





























Отзывы: