20
6. While
STANDBY
flashes, enter the
starting time of the program you
want to record. Then press
ENTER
.
STANDBY
stops flashing.
Note: Be sure the clock display is
set to show the desired clock
when the alarm time arrives.
7. Load a tape with adequate length
for the period you are going to
record. For instance, load a C-60
tape for recording a 30-minute
program.
8. Set
TAPE SELECT
to either
CrO
2
or
NORMAL
according to the type of
tape you loaded.
9. Press
RECORD
(
PLAY
auto-
matically goes down). The radio
turns on at the preset time and the
recorder starts recording. The
tape stops automatically at the
end of the tape, but the radio
keeps playing until you turn it off.
Recording AM Broadcasts
Sometimes you might hear a hum or
whistling sound when recording an AM
broadcast. To reduce or eliminate this
sound, set the
BEAT CUT
switch to the
position that gives you the best record-
ing.
Recording Using the Built-In
Microphone
Your cassette recorder has a built-in
condenser microphone on the front. To
record with the built-in microphone, fol-
low the steps in “Recording from the
Radio” on Page 19. But, instead of tun-
ing to a radio station in Step 4, simply
position the DX-392 near the source
you are recording. Then continue with
Step 6.
20-219.fm Page 20 Wednesday, August 4, 1999 9:23 AM
