54
Operation
2. To stop scanning, briefly press
)
.
Note: If you press
M
while the radio is scanning, the radio transmits on the channel you
selected before turning on scan. If you do not transmit within 5 seconds, the radio contin-
ues to scan.
3. To scan channels without interference eliminator codes, change the code for the set chan-
nel to
then press
)
.
Using Scan List Editing
You can select the channels you want to scan by putting those channels into a scan list.
1. To edit the scan list, repeatedly press
\
until
h
appears.
2. Repeatedly press
[
or
]
to scroll through the list of available channels. When you see a
channel you want to add to the scan list, repeatedly press
)
until
<
appears to add it or until
n
appears to remove it.
3. Follow the steps under “Using Channel Scan” on Page 53 to turn on channel scan.