11
Preparation
This symbol means that the inside contact, or
TIP, is negative (–).
This symbol means that the inside contact, or
TIP, is positive (+).
The adapter's plug must match your device's DC input jack with
respect to polarity (positive to positive and negative to nega-
tive).
Note: If the polarity symbol is not displayed on the device to be
powered, it might appear on an ID plate on the computer power
supply or the original adapter.
According to the jack's polarity, insert the Adaptaplug into the
output cord by aligning the correct polarity symbol (+ or –) on
the Adaptaplug with the word TIP on the output cord.
USING THE ADAPTER
After you have properly adjusted the output voltage and in-
stalled the Adaptaplug, follow these steps to use your adapter.
For Tip
Negative
For Tip
Positive
273-1826.fm Page 11 Thursday, October 5, 2000 8:39 AM