Radio Shack CT-502 Скачать руководство пользователя страница 15

Страница: 15 / 76

• You can disable the signal strength meter so it does not

appear. See “Turning the Signal Strength Meter Off/On”
on Page 26.

If the NoSvc indicator (above the display) turns on, the phone
is outside the cellular service area and you cannot make or
receive calls until you reach an area with service your phone
can use.

MAKING A CALL

1. Extend the antenna, flip open the cover, and be sure the

phone is on (the green power/lock indicator is flashing).

2. Press the number keys to enter the phone number you

want to dial (including the area code, if necessary). The
numbers appear on the display as you press them.

Notes:

• If you make a mistake, repeatedly press

to delete

one digit at a time, or hold down

to delete all dig-

its.

• The phone can display up to 7 characters at once. If

you enter (or display a message containing) more
than 7 characters, the characters automatically scroll
off the left side of the display. Press

at any time

to recall the overflow characters. See “A Number
Longer than Seven Digits” on Page 21.

3. Press

to dial the phone number. The InUse indica-

tor flashes and the phone briefly displays

Dialing

then the number called, then the signal strength meter.

4. To end the call, press

Note: Closing the cover does not end or disconnect a call.

CLR

RCL

SND

END

17-1111.fm Page 15 Wednesday, July 21, 1999 2:23 PM

Содержание CT-502













































































Результаты поиска

Содержание CT-502

Отзывы:

Похожие инструкции для CT-502

Бренды по названию

Популярные бренды

Radio Shack CT-502, Руководство пользователя

Результаты поиска

Содержание CT-502

Отзывы:

Похожие инструкции для CT-502

Бренды по названию

Популярные бренды