Installing the Batt
eries
2
+056#..+0)
"
6*'
"
$#66'4+'5
Your timer/clock requires three AAA batteries (not supplied)
for power. For the best performance and longest life, we
recommend RadioShack alkaline batteries.
.
.
.
.
1. Remove the battery compartment cover by pressing the
cover’s tab in the direction of the arrow and lifting the
cover.
2. Insert three batteries in the compartment as indicated
by the polarity symbols (
+
and –) marked inside. The
clock beeps three times. The default month, date, day,
and time appear.
3. Replace the cover.
If the clock stops operating properly or the display dims,
replace the batteries.
Rý
#"
±
5'66+0)
"
6*'
"
'
"
#0&
"
6+/'
1. Press
MODE
. The hour digits flash.
2. Repeatedly press or hold down
G
or
H
on the back of
the clock to set the hour. Press
12/24 HR
to switch
between the 12- and 24- hour formats. In the 12-hour
time format,
FCý
FCý
FCý
FCý
appears when it is a PM hour.
3. Press
MODE
. The minute digits flash.
4. Repeat Steps 2 and 3 to set the minute, year, month,
and date. After setting the correct date, the clock
automatically sets the day of the week.
5. Press
MODE
when you are finished setting the clock.
75+0)
"
6*'
"
%1706&190
"
6+/'4
The countdown timer lets you set a specific time to count
down from (up to 99 minutes).
±
1. Repeatedly press or hold down
G
or
H
on the front of
the timer until the desired countdown minutes appear.
2. Press
TIMER
to start countdown. To stop countdown,
press
TIMER
again. When the timer reaches 00:00, an
alarm sounds for one minute. Press any key to stop the
alarm.
.
"
%#76+10
"
.
•
Use only fresh batteries of the
required size and
recommended type.
•
Do not mix old and new
batteries, different types of
batteries (standard, alkaline, or
rechargeable), or rechargeable
batteries of different capacities.
•
If you do not plan to use the
timer/clock for a month or more,
remove the batteries. Batteries
can leak chemicals that can
destroy electronic parts.
#
"
+/2146#06
"
#
When replacing the batteries,
install the new ones within 1
minute of removing the old
batteries. Otherwise, the clock’s
year, month, date, day of week,
and time memory are lost.
±
"
016'
"
±
"
Do not press any buttons while
replacing batteries. If you do, the
stored time will be lost.
R
"
9#40+0)
ý
R
"
Dispose of old batteries promptly
and properly. Do not burn or bury
them.
±
"
016'
"
±
"
•
To reset the countdown timer
when it is running, press TIMER
to stop counting, then hold
down TIMER to reset the time to
00:00.
•
To reset the countdown timer
when it is not running and the
display is not set to 00:00, hold
down TIMER to reset the time to
00:00.
Insta
lling
the Batteries
