Radio Shack ARCHER 15-1275, Руководство пользователя, Страница: 13 / 17

Recording from a Source VCR (or Video Disc
Player) to One Other VCR
This procedure requires two VCRs (or one VCR and one video disc player) and
a TV.
Note: You may use a TV with a true m onitor function, such as Radio Shack's
Cat. No. 16-106, instead of a regular TV. T rue TV monitors have separate
audio and video inputs.
Use the drawing at right as a guide to connections for this basic C olor
Processor function.
Procedure
1. Make the connections as shown at right.
2. Turn on all equipm ent in your video system.
3. Make all adjustm ents and settings as described on page 6 of this manual.
4. Begin playback on the source VCR, and record a short “ le st” segment of
the program on the recording VCR.
5. Play back the test recording.
6. II the picture is not exactly as you want it, make the necessary fine-tuning
adjustments of the color processor (and other components) controls.
Note:
VCRs do not record the signal exactly as you see it on the screen. The
“ test" recording is absolutely necessary for getting the desired results. In some
cases, you might w ant to make more than one test recording (repeat steps 4 -
6
).
7. Rewind both VCR tapes to the beginning.
8. Activate the record m ode on the recording VCR; then start playback on Ihe
source VCR.
9. At the end of the recording, press Ihe stop buttons on both VCRs.
10. Check the newly recorded tape.
Connections
Optional
Enhancer/Stabilizer
V ID E O ,N
Optional
TV Monitor
VIDEO AUDIO
From Antenna
or Cable TV
Recording/Playback VCR
UHF .____ VHF
Video
A/B Switch
Source VCR (or Video Disc Player)
To Stereo Receiver
Optional
Video Sound Processor
8