9
OPERATION
Before you use the video selector, connect all the other equipment
in your video system and double-check all connections. You can
view or record the same source on all three output devices, or you
can view or record a different source on each device.
1. Plug the video selector into a standard AC outlet. The video
selector's POWER indicator lights.
Caution: The video selector's power cord has a polarized AC
plug (one blade is wider than the other). The plug fits into an
outlet only one way; do not force it!
2. Turn on the desired output devices (TVs or VCRs).
3. Use the video selector's front panel buttons to select the
desired video source for each TV or VCR.
4. If necessary, turn on the selected video signal source. Antenna
and direct cable signals are always active.
5. If you plan to record to one or more VCRs, set the selector’s
front panel button to select the desired video source for the
recording VCR:
When video is from:
Set switch to:
Normal TV
ANT
Cable TV
CABLE
VCR
VCR
Sources connected to
AUX-1
or
2
Corresponding
AUX
When video is from:
Set switch to:
Normal TV
ANT
Cable TV
CABLE
Sources connected to
AUX-1
or
2
Corresponding
AUX
15-2100.fm Page 9 Wednesday, December 8, 1999 8:11 AM
