Radio Shack AA0120495, Приложение

Страница: 10 / 37

INTERTEK TESTING SERVICES
FCC ID: AAO120495 5
2.0 System Test Configuration
2.1 Justification
The system was configured for testing in a typical fashion (as a customer
would normally use it), and in the confines as outlined in ANSI C63.4 (2003).
The EUT was powered by its cigarette adaptor (Input: 12VDC).
For maximizing emissions, the EUT was rotated through 360°, the antenna
height was varied from 1 meter to 4 meters above the ground plane, and the
antenna polarization was changed. The step by step procedure for
maximizing emissions led to the data reported in Exhibit 3.0.
The rear of unit shall be flushed with the rear of the table.
The equipment under test (EUT) was configured for testing in a typical fashion
(as a customer would normally use it). The EUT was placed on turntable,
which enabled the engineer to maximize emissions through its placement in
the three orthogonal axes.
2.2
EUT Exercising Software
There was no special software to exercise the device. Once the unit is
powered up, it transmits the RF signal continuously.
2.3
Special Accessories
There are no special accessories necessary for compliance of this product.