6
Installation
2. Loosen the screw on the battery retaining clip,
then slide the clip aside.
3. Install the two supplied CR 2032 batteries in the
compartment with their positive (+) sides facing
up.
4. Slide the battery retaining clip over the center of
the top battery and tighten its screw.
5. Use a small pointed
object (such as a
straightened paper
clip) to slide
A
B
C
to
the desired channel
and set
Low/Hi
to the
desired light sensitiv-
ity. (Factory setting is
channel
B
with
Hi
sen-
sitivity.)
6. Make sure the black o-ring remains secure
around the transmitter’s top cabinet, then replace
the transmitter’s bottom cabinet.
7. Tighten the transmitter’s screws.
A B C Channel Switch
Low Hi Sensitivity Switch
63-1110.fm Page 6 Friday, September 22, 2000 3:33 PM
