Limited One-Year Warranty
Cautions and Notes
Using the Digital Voltage Meter
The supplied voltage meter is used to check your vehicle’s battery voltage and charging voltage.
1. Connect the supplied adapter to your vehicle’s cigarette light adapter.
2. Connect the other end to the unit’s 12V DC PLUG. The DC POWER LED flashes continuously.
3. For battery voltage, check the reading one hour after turning your car engine off. For charging voltage, read the unit while your car’s
engine and main beam are turned on.
:
the current or charging voltage is less than 11.6V.
:
the current or charging voltage is between 11.7V and 12.4V.
the current or charging voltage is between 12.5V and 12.9V.
the current or charging voltage is 13.0V or greater.
h
h
i
j
Keep the thermometer dry; if it gets wet, wipe it
dry immediately. Handle the thermometer care-
fully; do not drop it. Keep the thermometer away
from dust and dirt, and wipe it with a damp cloth
occasionally to keep it looking new.
• Dispose of old batteries promptly and properly.
• Do not burn or bury batteries.
• Use only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of batteries (standard,
alkaline, or rechargeable), or rechargeable batteries of different
capacities.
• If you do not plan to use the thermometer for a month or more, remove
the batteries. Batteries can leak chemicals that can damage electronic
parts.
• Do not attach the thermometer to a surface that can get extremely hot,
like the dashboard of a car.
• Do not mount the thermometer or sensor where they will be in direct
sunlight.
• Do not place the thermometer in water, or in a location where it is likely
to get wet. Only the sensor and its cord are water-resistant.
• When mounting the sensor on a vehicle's windshield, be sure to place it
out of the windshield wipers' path to avoid damaging the sensor.
Step Five
©2003. RadioShack Corporation.
63-1039
All Rights Reserved.
Printed in China
RadioShack and RadioShack.com are trademarks
07A03
used by RadioShack Corporation.
This product is warranted by RadioShack against manufacturing defects in material and workmanship
under normal use for one (1) year from the date of purchase from RadioShack company-owned stores
and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION
TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS
PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUS-
TOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAM-
AGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY
DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE,
OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN
IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation
of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales
receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless other-
wise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b)
replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced
parts and products, and products on which a refund is made, become the property of RadioShack. New
or reconditioned parts and products may be used in the performance of warranty service. Repaired or
replaced parts and products are warranted for the remainder of the original warranty period. You will be
charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other
than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or bat-
teries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product
removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
Care
Using the ICE Alert
You can set an alert to sound when outdoor
temperatures range from 30.2
°
F to 39.2
°
F (-1
°
C to
4
°
C), meaning there is potential for freezing rain,
sleet, snow, or icy road conditions. Press
ALERT
until
appears to turn on the alert. When the
outdoor temperature is within this range, a beep
sounds once every minute until you turn off the
alert, or until the temperature rises or falls outside
of the range.
remains on the display as long as
the temperature is less than 39.2
°
F (4
°
C).To turn
the alert off, press
ALERT
until
disappears.
Power ..........................................2 x AAA batteries
Temperature Range:
Indoor ................... –4
°
F to 158
°
F (–20
°
C to 70
°
C)
Outdoor ............... –58
°
F to 158
°
F (–50
°
C to 70
°
C)
Temperature Accuracy:
0
°
C to 40
°
C ...............................................
±
1.0
°
C
Other Range ...............................................
±
1.5
°
C
Specifications are typical; individual units might vary. Specifi-
cations are subject to change and improve without notice.
Specifications
Step Six
Minimum and Maximum Memory
Repeatedly press
MIN/MAX
until
MIN
or
MAX
appears on the display to view the minimum or
maximum recorded temperature within the last 24
hours. To clear memory, hold down
MIN/MAX
for
about three seconds. Memory records are updated
every day at 12:00 AM.
Step Seven
