3
n
Notes:
•
It takes about 30 minutes to charge the Li-Po battery.
• Replace the AA batteries the in the charger when the red
LED does not light.
•
You also can use a DC 9V 300mA AC adapter (not
included) to power the charger.
2
Install Li-Po and 9V Batteries
1.
Turn off the car and controller.
2.
Insert one 9V battery (not supplied) in the controller’s
battery compartment matching the polarity (+ and –)
marked inside.
3.
Unscrew the battery cover of the chassis and install the
fully charged Li-Po battery, matching the polarity marks
inside. The battery only fits one way.
4.
Replace the cover and tighten the screw.
9V