![Radio Shack 6-in-1 Remote Control Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/radio-shack/6-in-1-remote-control/6-in-1-remote-control_owners-manual_3413929016.webp)
Need help? Call 1-800-989-4706
16
9. To brighten or dim lights connected to lamp
and appliance modules, press the digit key
for the module you want to control. Then
hold down
(Brt)
or
VOLUME –
(Dim)
on the 6-in-1. Release the key when
the desired level of brightness is reached.
Note: You must select the individual light to
brighten or dim even if you used
POWER (All
Lts On)
on the 6-in-1 to turn on all the lights
at the same time.
Setting a Plug ’n Power Timer
You can set the 6-in-1 Remote Control to turn on
or off a lamp/appliance module you select or turn
off all modules after a period of 1 to 99 minutes.
This works with an optional IR command console
or Plug ’n Power Wireless Remote Control Sys-
tem.
Note: When you use the 6-in-1 to control all mod-
ules at one time, the only command that works is
All Off
.
1. Press Plug ’n Power on the 6-in-1.
2. Hold down
TIMER
on the 6-in-1 until the red
light above
stays on.
Note: Skip Step 3 if you are turning all mod-
ules off using the
All Off
command.
3. To turn on or off a specific module using the
6-in-1 Remote Control, press the digit keys
to enter the module’s device code. The red
light blinks once.
4. Press
On
(
C (On)
(to set a module
to turn on),
Off
(
CHANNEL – (Off)
(to set a
module to turn off), or
MUTE (All Off)
(to set
all modules to turn off.
When the red light blinks once, the 6-in-1
has accepted the code.
15-1923.fm Page 16 Monday, July 19, 1999 12:41 PM