18
If you do not want to take the call, just let
the TAD-1028 finish recording the call-
er’s message.
PLAYING MESSAGES
If there are new messages, the PLAY/
SKIP indicator flashes until all the new
messages have been played.
To play all messages, press
PLAY/SKIP
.
The TAD announces the number of
messages. If there are no messages,
the TAD announces, “No message.”
Before playing each message, the TAD-
1028 announces the message number
and the day and time when the mes-
sage was recorded. After all messages
play, the TAD announces, “End of mes-
sage(s)” then it resets to answer calls.
The PLAY/SKIP indicator lights steadily
and all messages are saved until you
delete them.
Repeating Messages
To replay a message, if you have lis-
tened to at least 5 seconds of it, press
OGM/REPEAT.
The current message
starts again.
Note: If you have not listened to 5 sec-
onds of the message, or the message is
not at least 5 seconds long, pressing
OGM/REPEAT
replays the previous
message.
Skipping Messages
To skip to the next message during
playback, press
PLAY/SKIP
once. The
next recorded message plays.
Pausing Message Playback
To pause message playback, press
AN-
SWER/STOP/DELETE
. To resume play-
ing messages, press
PLAY/SKIP
.
Otherwise, after pausing for 60 sec-
onds, the TAD-1028 sounds three
beeps and stops playback.
Stopping Message Playback
To stop playback at any time, press
AN-
SWER/STOP/DELETE
twice. The TAD-
1028 beeps once and resets to answer
calls. The PLAY/SKIP indicator contin-
ues to flash if you have not yet listened
to all your messages.
Illus. showing PLAY/SKIP.
43-788.fm Page 18 Monday, August 16, 1999 8:19 AM
