Radio Shack 43-5862, Руководство пользователя, Страница: 67 / 96

Beyond the Basics
3. Any digits you enter from then on will be sent as tone dialing.
When this call ends, the phone automatically returns to pulse
dialing.
See “ Changing the Dial Mode ” on page 29 for instructions on
setting your phone for pulse or tone dialing.
Seven-Digit Dialing
If you can make a local call by dialing only seven digits (instead
of ten), you can program your local area code into your phone.
If you get a call from within your area code, you will only see the
seven-digit phone number. If you get a call from outside your
area code, you will see all ten digits. To enter an area code:
From the Handset
1. Press the MENU soft key.
2. Select the GLOBAL SETUP menu, and then the AREA CODE
submenu.
3. Use the number keypad ( 0 – 9 ) to enter a 3-digit area code.
If an area code has already been stored, it will appear in the
display. Press the
DELETE soft key to delete the stored code,
and then enter a new one.
4. Press the OK soft key. You will hear a confirmation tone.
From the Base
1. Press MENU/SELECT .
2. Select the SYSTEM SETUP menu.
3. Select the GLOBAL submenu, and then the AREA CODE
submenu.
4. Use the number keypad ( 0 – 9 ) to enter a 3-digit area code.
If an area code has already been stored, it will appear in the
display. Press the
DELETE soft key to delete the stored code,
and then enter a new one.
5. Press MENU/SELECT . You will hear a confirmation tone.
UP01799ZZ_1.indb 67 4/12/2006 12:43:51 PM