background image

14

Service and Repair

If your telephone is not performing as it should, take it to your 

local 

RadioShack 

store for assistance. To locate your nearest 

RadioShack

, use the store locator feature on 

Radioshack’s

 

website (www.radioshack.com), or call 1-800-THE SHACK (843-

7422) and follow the menu options. Modifying or tampering 

with the telephone’s internal components can cause a 

malfunction and might invalidate its warranty and void your 

FCC authorization to operate it.
Your telephone connects directly to a modular telephone 

line jack. If your telephone wiring does not have a modular 

jack, you can update the wiring yourself using jacks and 

adapters (available at your local 

RadioShack 

store), or have 

the telephone company update the wiring for you. You must 

use compatible modular jacks that are compliant with Part 68 

of FCC Rules and the requirements adopted by the ACTA. The 

telephone cord and modular plug provided is Part 68 compliant 

for connecting to the telephone company network.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

• Consult your local 

RadioShack

 store or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by RadioShack may cause interference 

and void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (1) This device may not cause harmful interference, and (2) This device 

must accept any interference received, including interference that may cause undesired 

operation.

Содержание 43-3901

















Отзывы: