Radio Shack 43-3810, Руководство пользователя

Страница: 16 / 32

16
Telephone Operation
Note: The handset window has a plastic film
on it to protect it during shipment.Carefully
peel off the film before using your phone for
the first time.
SWITCHING BETWEEN THE
HANDSET AND THE
SPEAKERPHONE
To switch to the speakerphone while you are
using the handset, press
SPEAKER
on the
base. When you hear the conversation on
the speakerphone, press
TALK
on the hand-
set.
To switch to the handset while you are using
the speakerphone, lift the handset off the
base. If the handset is away from the base,
press
TALK
, then press
SPEAKER
.
USING BOTH THE HANDSET
AND THE SPEAKERPHONE
If someone else is using the speakerphone,
press
TALK
on the handset to join the con-
versation. If someone else is using the hand-
set, press
SPEAKER
on the base to join the
conversation.
During the call, one person can hang up and
let the call continue. Or, both people can
hang up to end the call.
Note: If you hear a high-pitched noise from
the base’s speaker, the handset and the
base are too close together.
USING A HEADSET
You can talk with hands-free convenience
using an optional headset that has a
3
/
32
-inch
(2.5-mm) plug. Contact your local
RadioShack store for a suitable headset.
To connect the headset, open the rubber
cover on the side of the handset, then insert
the headset’s plug into the jack.
Notes:
• Connecting a headset disconnects the
handset’s earpiece and microphone.
•
VOL/CID
8
8 8
8
or
9
9 9
9
on the handset also
controls the connected headset’s
volume.
• If you place the handset on the base to
recharge it while the headset is con-
nected, be sure the handset seats prop-
erly.
With a headset connected, make or answer
calls as usual using the keys on the handset.
When you finish using the headset, discon-
nect it from the handset and close the rubber
cover to protect the jack.
You can use a handset holder (available
from your local RadioShack store) to hang
the handset on your belt for greater conve-
nience.
MEMORY DIALING
You can store up to 20 phone numbers and
names in memory, then dial a stored number
by entering its memory location number.
Each number can be up to 20 digits, and
each name can be up to 13 characters.
Storing a Name and Number in
Memory
When you are storing a number in memory,
an error tone sounds and the phone exits the
storing process if you wait more than 20 sec-
onds between each keypress.
Note: If you receive a call during memory en-
try, the phone exits the storing process.
Follow these steps to store a number and
name in memory.