U
sin
g Y
ou
r P
h
on
e
33
T
ONE
D
IALING
S
WITCH
O
VER
Some telephone companies use equipment
that requires pulse dialing (sometimes
referred to as rotary dialing). If you need to
enter tone dialing digits, you can switch-
over to tone dialing during the call. This
feature is useful when you need tone dialing
to use automated systems, for example,
entering your bank account number after
you have called your bank.
Ô
Initially make your call with the pulse dialing
mode. Once your call connects, press
/TONE/<
. Enter the desired number. These
digits will be sent as tone dialing. Once the
call ends, the tone mode is canceled and
pulse dialing mode resumes.
T
RAVELLING
O
UT
-
OF
-R
ANGE
During a call, as you begin to move your
handset too far from your base unit, noise
may increase. If you pass the range limits of
the base unit, you will hear a beep and see
Out of Range
on the display, and then
the handset returns to standby mode.
P
RIVACY
M
ODE
Privacy mode prevents interruption from
another handset.
This works only when
the phone is in use
.
While on a call, press the
PRIVACY
soft key
on the handset.
Privacy Mode On
and appear in the
display. To exit Privacy Mode, press the
PRIVACY
soft key again when Privacy Mode
is on.
Privacy Mode Off
appears.
C
ONFERENCING
If you have two handsets, up to four people
can participate in a conference call. A four-
way conference call consists of Outside
Line1 + Outside Line 2 + Two Handsets.
Ô
Ô
NOTES
Ô
Tone Dialing Switch Over
The tone feature only
applies when the dial mode
is set to pulse.
Conferencing
If another handset is in
Privacy Mode, you cannot
join the call. If someone is
using the handset in
Privacy Mode,
Unavailable
appears
in the display when you try
to join the call.
43-3703.book Page 33 Thursday, July 15, 2004 11:37 AM
